Products: Domestic
Industrial
AXI-EEX
Description: For wall mounting. Squared metallic frame.
Based on the Axial series, these units have explosion-proof single phase and three phase motors. Maximum physical protection by means of a dense grid integrated in the support arms. Certificated fans, nº ex. 50630, II2GcIIBT4, LOM 05ATEX0117.
Applications: For sites where there may be a risk of explosion.
Flow: 1400 m3/h - 35000 m3/h.
Size 250 - 710 mm. diameter.
Power 125 - 5.5000 W.
AXIAL
Description: For wall mounting. Wide application spectrum.
A wide range of solutions with M.N.S. (Multiflow Novovent System) multiflow thick profile, high-performance impellers, which enable the selection according to requirements of fl ow, consumption, sound level, size, etc. Supersized low-slip motors with dense grid integrated in the motor support arms. All models are adjustable by electronic systems or trans.
Applications: Industries, warehouses, restaurants, workshops, large premises, car parks, dryers, cabins and industrial cold storage units.
Flow: 2000 m3/h - 90900 m3/h.
Size 250 - 1000 mm. diameter
Power BOX - 18.500 W.
AXIAL BOX
Description: With belt driven motor.
Large axials: low rotation speed and high performance.
Applications: Especially suitable for farm ventilation, greenhouses, large areas with low noise level.
Flow: 16000 m3/h - 45000 m3/h.
Size 800 - 1200 mm. diameter.
Power 0.5 - 1.5 HP.
AXIAL SOLID
Description: Strong axials.
Strong Axial with alluminium impellers, with 6, 8 or 12 blades. A wide range of solutions with M.N.S. allows to regulate in many different power levels.
Applications: Air extraction through ducts in industry applications, shopping centres, workshops, storing halls, co-generation plants.
Flow: 3000 m3/h - 83400 m3/h.
Size 315 - 1000 mm. diameter.
Power 55W - 22kW.
AXIAL WINDER
Description: New generation fans for wall mounting.
Aluminium sickle impeller with winglet and jagged profile, the Serrated Novovent Concept (S.N.C.) blades compared with the traditional ones gets better performance in airflow and pressure, decrease in the powers needs and sounds level, about 15%.
Applications: For duct extraction in general industry, shopping centers, workshop, storing halls, catering, large premises, co-generation plants, dryers.
Flow: 9934 m3/h - 75500 m3/h.
Size 560 - 1000 mm. diameter
Power 0,55W - 15kW.
AXIAN
Description: For wall mounting.
Solid construction, motors mounted on frame. Include M.N.S. (Multiflow Novovent System) multiflow impellers.
Applications: General industry, warehouses, workshops, large premises, car parks, dryers.
Flow: 5500 m3/h - 90900 m3/h.
Size 450 - 1000 mm. diameter.
Power 180 - 18.500 W.
AXIAN PIROS
Description: Smoke extract EN 12101-3 and ATEX EN 13463-1.
Smoke extract EN 121013 and ATEX EN 13463-1, EN 1127-1 certified. Axial wall mounted fan. Fitted with Multiflow Novovent System M.N.S. 3, 4, 6, 8, 9 or 12 die cast aluminium impellers.
Applications: Smoke extracts and oil vapours extract in areas such as cark parks, garages.
Flow: 8.100 m3/h - 127.500 m3/h.
Size 450 - 1.250mm.
Power 550W - 22KW.
AXIAN POWER
Description: Wall mounted.
Short cased axial fl ow fans fitted with die cast aluminium impellers with M.N.S. (Multiflow Novovent System) which allows for the same diameter 5 different solutions, therefore offering the best solution whether your priorities are airflow, pressure, consumption, noise level or price. Recommended for installation with high level of ae.
Applications: Wall mounted at the beginning duct intake or extract for industries.
Flow: 5.300 m3/h - 113.000 m3/h.
Size 560 - 1250 mm. diameter.
Power 0,37 - 55 Kw.
AXIAN SOLID
Description: For wall mounting.
Of a robust construction, motors installed onto a mounting which is adequate for the frame. All of them are fitted with impellers with a variable pitch angle. With 3, 4, 6, 8, 9 or 12 blades.
Applications: General industry, parkings, dryers, co-generation plants.
Flow: 4000 m3/h - 180.000 m3/h.
Size 450 - 1250 mm. diameter.
Power 180 - 75.000 w.
AXI BOX
Description: Axial flow fans in thermo-acoustic isolating box for easy connection to ducts.
Solid construction, motors mounted on frame. Include M.N.S. (Multifl ow Novovent System) multifl ow impellers.
Applications: General industry, warehouses, workshops, large premises, car parks, dryers.
Flow: 5500 m3/h - 90900 m3/h.
Size 450 - 1000 mm. diameter.
Power 180 - 18.500 W.
AXI BOX SOLID
Description: Axial flow fans in thermo-acoustic isolating box for easy connection to ducts.
Of a robust construction, motors installed onto a mounting which is adequate for the frame. All of them are fitted with impellers with a variable pitch angle. With 3, 4, 6, 8, 9 or 12 blades.
Applications: General industry, parkings, dryers, co-generation plants.
Flow: 4000 m3/h - 180.200
Size 450 - 1250 mm. diameter.
Power BOX - 75000 W.
AXIPLUS
Description: For wall mounting. Wide application spectrum.
A wide range of solutions with M.N.S. (Multiflow Novovent System) multiflow thick profile, high-performance impellers, which enable the selection according to requirements of fl ow, consumption, sound level, size, etc. Supersized low-slip motors with dense grid integrated in the motor support arms. All models are adjustable by electronic systems or trans.
Applications: Industries, warehouses, restaurants, workshops, large premises, car parks, dryers, cabins and industrial cold storage units.
Flow: 2000 m3/h - 32000 m3/h.
Size 315 - 710 mm. diameter.
Power 90 - 4.000 W.
AXITEJ
Description: Powerful robust fan for extract or intake application.
Wide variety thanks to the exclusive M.N.S. (Multiflow Novovent System) multiflow impellers which enable selection according to requirements of fl ow, consumption, sound level, size, etc. Available in two versions, with or without valve (which obstructs the outflow when unit is not in use). Standard fan is prepared for extract purposes, can be intake to order. Valve is not available when fan is prepared for intake application.
Applications: Industry, warehouses, workshops, large premises.
Flow: 1600 m3/h - 45700 m3/h.
Size 315 - 1000 mm. diameter.
Power 90 - 7500 W.
AXITEJ BS
Description: Wide variety of low roof axial fans.
Provided with M.N.S. (Multiflow Novovent System) impellers which enable a selection according to individual requirements concerning fl ow, consumption, sound level, size, etc. Standard fan is prepared for extract purposes, however it exists the option to order intake roof units.
Applications: In places where a fl at shape of the roof fan is required: for industry, warehouses, workshops, large premises, Shopping centre.
Flow: 1600 m3/h - 25800 m3/h.
Size 315 - 710 mm. diámeter
Power 90 - 4000 W
AXITRANS
Description: Belt driven axial flow fan.
The streamlining transmission system is accessible trough an inspection hatch. The motor is mounted on a platform with a belt tension adjustment system.
Applications: Painting lines, vapour extraction, dust-filled environments. In general, for extraction of air that contains elements in suspension which should not come into contact with the motor.
Flow: 6500 m3/h - 40000 m3/h.
Models: 450, 560, 710 y 900.
Size 450 - 900 mm. diameter.
Power 250 - 3000 W.
AXITUB
Description: Long cased axial flow fan with thermoplastic impellers.
Long cased axial fl ow fan with thermoplastic impellers with exclusive patented M.N.S. (Multiflow Novovent System) variable pitch angle. Up to five different solutions for the same diameter and rotation speed. This allows to select the most suitable fan whether airflow, pressure, consumption, sound level, size, or price is requested. Adjustable to any voltage.
Applications: For duct extraction in general industry, workshops, catering, car parks and large premises.
Flow: 2000 m3/h - 90900 m3/h.
Size 250 - 1000 mm. diameter.
Power 18W - 18,50 kW.
AXITUB PIROS
Description: Smoke extract EN 12101-3 and ATEX EN 13463-1, EN 1127-1 certified. Axial long cased fan.
Fitted with Multifl ow Novovent System M.N.S. 3, 4, 6 or 8 die cast aluminium impellers.
Applications: Smoke extracts and possible oil vapours extract in areas such as cark parks, public buildings.
Flow: 4.012 m3/h - 127500 m3/h.
Size 315 - 1250 mm. diameter.
Power 550 - 22.000 W.
AXITUB PIROS WINDER
Description: New generation axial long cased fan, smoke extract EN 12101-3 and ATEX EN 13463-1, EN 1127-1 certified.
Aluminium sickle impeller with winglet and jagged profile, the Serrated Novovent Concept (S.N.C.) blades compared with the traditional ones gets better performance in airflow and pressure, decrease in the powers needs and sounds level, about 15%.
Applications: Designed to work inside the risk area. Removes toxic fumes and gases in case of fi re. Also ideal for extracting fumes caused by high temperatures.
Flow: 9934 m3/h - 141.250 m3/h.
Size 560 - 1250 mm. diameter
Power 0,55W - 37kW.
AXITUB POWER
Description: Long cased axial flow fan for high pressures.
Long cased axial fl ow fan with high pressure aluminium impellers with exclusive patented M.N.S. (Multiflow Novovent System) variable pitch angle. Up to five different solutions for the same diameter, rotation speed and number of blades. This allows to select the most suitable fan whether airflow, pressure, consumption, sound level, size, or price is requested.
Applications: For ducted application with important pressure drop in industries, workshops, car parks, large premises.
Flow: 10.000m3/h - 113.400 m3/h.
Size 560 - 1.250 mm. diameter.
Power 0,25 - 45 Kw.
AXITUB SOLID
Description: Long cased axial flow fan.
Long cased axial fl ow fan with aluminium impellers with exclusive patented M.N.S. (Multiflow Novovent System) variable pitch angle. Up to five different solutions for the same diameter, rotation speed and number of blades. This allows to select the most suitable fan whether airflow, pressure, consumption, sound level, size, or price is requested. Adjustable to any voltage.
Applications: Air extraction through ducts in industry applications, shopping centres, workshops, storing halls, co-generation plants.
Flow: 2000 m3/h - BOX.200 m3/h.180.200
Size 250 - 1250 mm. diameter.
Power 90 - 75.000 W.
AXITUB WINDER
Description: New generation long cased axial flow fan.
Aluminium sickle impeller with winglet and jagged profile, the Serrated Novovent Concept (S.N.C.) blades compared with the traditional ones gets better performance in airflow and pressure, decrease in the powers needs and sounds level, about 15%.
Applications: For duct extraction in general industry, shopping centers, workshop, storing halls, catering, large premises, co-generation plants, dryers.
Flow: 9.334m3/h - 141.250 m3/h.
Size 560 - 1250 mm. diameter
Power 0,55W - 37kW.
BASIC
Description: Suitable for medium and small volumes. Applications: Public premises, warehouses, industrial units.
Flow: 550 m3/h - 2800 m3/h.
Power 10 - 90 W.
BP
Description: Double inlet direct driven IP55 class F motor fan.
For clean air applications, low noise level and medium/high pressure operation, four different positions availables.
Applications: Air conditioning and ventilation operations.
Flow: 1.350 m3/h - 12.000 m3/h.
Size 7/7 - 15/15".
Power 74 - 2.200 W.
JET PIROS
Description: Smoke extract EN 12101-3 and ATEX EN 13463-1, EN 1127-1 certified.
Applications: Ideals for car park and tunel ventilation.
Flow: 2.000 m3/h - 153.000 m3/h.
Size 315 - 1.250 mm. diameter.
Power 20 - 37000 W.
KIT SOBRE PRESION ESCALERAS
Description: The kit include an Isolating Thermo Acoustic Galvanized Steel Cabinet, a Frequency Controller and a Differencial Pressure Display.
Flow: 5.700 m3/h - 24500 m3/h.
Size 400 - 710 mm. diámetro.
PIROS BOX
Description: Smoke extract EN 12101-3 and ATEX EN 13463-1, EN 1127-1 certified.
Axial smoke extract fans in cabinet casing. This solution can be fitted with impellers bearing either 3, 4, 6, 8, 9 or 12 blades.
Applications: Designed to work inside the risk area. Removes toxic fumes and gases in case of fi re. Also ideal for extraxting fumes caused by high temperatures.
Flow: 4.012 m3/h - 127000 m3/h.
Size 315 - 1250 mm. diameter.
Power 550 - BI00 W.
PIROS BOX WINDER
Description: New generation axial flow fans in thermo-acoustic isolating box smoke extract EN 12101-3 and ATEX EN 13463-1, EN 1127-1 certified.
Aluminium sickle impeller with winglet and jagged profile, the Serrated Novovent Concept (S.N.C.) blades compared with the traditional ones gets better performance in airflow and pressure, decrease in the powers needs and sounds level, about 15%.
Applications: Designed to work inside the risk area. Removes toxic fumes and gases in case of fi re. Also ideal for extracting fumes caused by high temperatures.
Flow: 9.334m3/h - 141.250 m3/h.
Size 560 - 1250 mm. diameter
Power 0,55W - 37kW.
PORTATIL
Description: For ventilation support.
A range of extremely strong fans which produce a high airflow to the area being treated.
Applications: For general and commercial use. Suitable for machinery cooling, drying purposes, dispersion of dust and smoke and introduction of fresh air into workshops.
Flow: 2000 m3/h - 24000 m3/h.
Size 250 - 710 mm. diameter.
Power 90 - 750 W.
ROTEX
Description: For wall mounting. External rotor motor.
Medium-sized, low sound level, regulation from 0 to 100%.
Applications: Industrial cold storage machinery, large premises, warehouses.
Taille
Flow: 1600 m3/h - 6600 m3/h.
Size 315 - 450 mm. diameter
Power 80 - 240 W.
BOX FILTER
Description: Filtration equipment.
The BOX FILTER are suitable for residential and commercial applications.
Flow: 0 m3/h - 16.000 m3/h.
Versions: Equipo de filtración
Power 1,10W - 7,5kW.
BOX LINE 400º 2H
Description: In-line smoke extract fan.
For smoke extract installation, bakWard curved direct driven wheel with IP55 Class F (BOX LINE E) or high temperature motor (BOX LINE I).
Applications: Kitchen extract, hotels, car parks, public buildings.
Flow: 1.900 - 22800 m3/h.
Power 120 - 3000 W.
BP
Description: Double inlet direct driven IP55 class F motor fan.
For clean air applications, low noise level and medium/high pressure operation, four different positions availables.
Applications: Air conditioning and ventilation operations.
Flow: 1.350 m3/h - 12.000 m3/h.
Size 7/7 - 15/15".
Power 74 - 2.200 W.
BP BOX
Description: Noise isolated cabinet fan.
Ideal for duct operation, intake or extract application of clean air, with inlet in several positions available. Round inlets/outlets as well as outdoor operation accessories available. Cabinet supplied with fi xing brackets.
Applications: Duct installations, car parks, catering.
Flow: 1.350 m3/h - 12.000 m3/h.
Size 7/7 - 15/15"
Power 74 - 2.200 W
BPT BOX R
Description: Noise isolated cabinet, double inlet belt drive, impeller with backward curved blades.
Composed of fan on antivibration mounting, motor, belts and pulley upon required working point.
Applications: Extract or intake of large airflow with high pressure for shopping centres, hospitals, airports, public places.
BPT
Description: Belt driven double inlet fan.
Activated by motor located either on the back of the fan or behind it, fi tted with belts and pulleys.
Applications: Air conditioning units, large ventilation installations.
Flow: 3400 m3/h - 55000 m3/h.
Size 7/7 - 30/28".
Power BOX - 15000 W.
BPT BOX HT COMPACT
Description: Belt driven double inlet fan.
Centrifugal cabinet fan for smoke extract.
Applications: Public building such as Hotels, theatres, cinemas, malls, car parks, industrial kitchens.
Flow: 3400 m3/h - 55000m3/h.
Size 9/9 - 30/28"
Power 370 - 15000 W.
BP TWIN
Description: Direct driven centrifugal twin fan cabinets.
Ideal solution to provide continuous extract ventilation.
Applications: Ventilation of high rise buildings, hospitals, warehouses, workshops and vilas. Fans can be installed with automatic change-over from a failed to stand-by fan.
Flow: 1.350 m3/h - 12.000 m3/h.
Size 7/7 - 15/15".
Power 74 - 2.200 W
CAL
Description: Steel plate centrifuges.
For medium flows and high pressures. Direct driven fan, mounted on support (except for sizes 100 to 280 where motor is coupled by front mounting).
Applications: Industrial environments, ovens, local extraction through ducts.
Flow: 225 m3/h - 11000 m3/h.
Models: 100 - 450.
Power 60W - 7,50kW.
CAL HTE
Description: Single inlet EN 12101-3 certified smoke extract direct driven fan. Motor outside risk area.
For installation otside the risk area.
Applications: Public buildings, car parks, industries
Flow: 1.950 m3/h - 13.000 m3/h.
Models: 250 - 450.
Power 550W - 9.200W.
CAL PP
Description: PP casing and wheel.
For corrosive environments.
Applications: Industry, laboratories.
Flow: 1000 m3/h - 6700 m3/h.
Models: 200 - 450.
Power 180W - 1.100W
CANAL
Description: Centrifugal extractor for insertion between tubes.
Applications: The TUB and CANAL are ideal for long tube installations with few sections. Its particular design allows the device to be mouted indistinctly at the beginning, middle, or at the end.
Flow: 250 m3/h - 750 m3/h.
Models: 100 - 200.
CAP
Description: Steel wheel and casing.
High preassure centrifugal fans, steel construction, for clean or dusty air.
Applications: Machinery, dust, moving small parts.
Flow: 900 m3/h - 5.500 m3/h.
Models: 400 - 710.
Power 750 - 15.000 W.
CF
Description: Smoke extract centrifugal roof fan.
High performance roof fan with backWard curved impeller allowing moderate consumption. The motor is not in contact with extracted gases, therefore the fan is suitable for extraction of harmful and/ or dangerous environments, saturated vapours and high temperatures.
Applications: Industry, kitchen extract, hotels, fi replaces, car parks, public buildings.
Flow: 1000 m3/h - 24000 m3/h.
Models: 31 - 80.
Power 90 - 3000 W.
CRE
Description: Post-heating electrical section. Low profile external rotor motor roof fan .
Bacward curved impeller speed controllable.
Applications: Roof extraction of clean air.
Flow: 570 m3/h - 10.400 m3/h.
Models: 125 - 630.
Power 85W - 1050W
CR HTE
Description: Single inlet EN 12101-3 certified smoke extract direct driven fan. Motor outside risk area.
For installation outside the risk area.
Applications: Public buildings, car parks, industries.
Flow: 5.700 m3/h - 33.000 m3/h.
Models: 400 - 710.
Power 750W - 11,00kW
CR HTI
Description: Single inlet backWard curved EN 12101-3 certified smoke extract direct driven fan. 400°C 2 hours. Motor located in the risk area.
For installation outside the risk area.
Applications: Public buildings, car parks, industries.
Flow: 5.700 m3/h - 33.000 m3/h.
Models: 400 - 710.
Power 750W - 11,00kW.
F
Description: Steel wheel and casing.
Medium pressure centrifugal fans, single inlet, steel construction, for clean air or with small quantities of dust.
Applications: Machinery, dust, moving small parts.
Flow: 450 m3/h - 2.100 m3/h.
Models: 200 - 400.
Power 180W - 2.200W
MBC
Description: In line low profile centrifugal fans fitted with external rotor motor.
Available either with round or rectangular inlet and outlet.
Applications: To be used with duct installation since these fans offer high pressure. Flexible with a speed controllable motor, this fan can be installed in any position.
Flow: 350 a 7300 m3/h.
Size diámetro. 100 mm - 400 mm.
Power 60 - 1.300 w.
MBR
Description: In line low profile centrifugal fans fitted with external rotor motor.
Available either with round or rectangular inlet and outlet.
Applications: To be used with duct installation since these fans offer high pressure. Flexible with a speed controllable motor, this fan can be installed in any position.
Flow: 1050 a 10300 m3/h.
Size 40x20 mm. - 100x50 mm.
Power 135W - 1.800W
TWIN BPT BOX
Description: Belt driven centrifugal twin fan cabinets.
Ideal solution to provide continuous extract ventilation.
Applications: Ventilation of high rise buildings, hospitals, warehouses, workshops and vilas. Fans can be installed with automatic change-over from a failed to stand-by fan..
Flow: 3400 m3/h - 55000 m3/h.
Size 7/7 - 18/18".
Power 0.75kW - 5.50kW.
<
>
A
Description: Axial fans for toilet and bathroom.
A versalite range combining basic units with its accessories. Water-proof.
Applications: For open air ventilation of small enclosures or through reduced length conduits.
Flow: 90 - 310 m3/h
Models: 100 | 120 | 150
Versions: timer, with ball bearing motor, DC
SUITE
Description: Mural hairdryer
A sufficient dryer for bathroom use. Gives prestige to hotels, enhances the apartment, and family members will appreciate it at home. Provided with double isolation.
Applications: For hotels, locker rooms, sport facilities and homes.
Models: Plastic
Versions: Sensor
Power 900 W
CHEF
Description: Centrifugal extractors for kitchen furnitures.
Robust and high performance due to its high rate of airflow, low noise level, detachable, safety and easy installation.
Applications: Filters steam, vapors and smoke that accumulate in the kitchen.
Flow: 350 - 610 m3/h.
Models: 40,50,60.
MURO CRISTAL
Description: Axial fans for wall and/or glass mounting.
Flexible units for wall or window mounting, for single or double glazing. Comes with manual or automatic reversible shutters. Different options to enjoy an elegant and effective concept.
Applications: For all areas where the extractor will be fitted onto glass and/or wall
Flow: 250 - 1400 m3/h.
Models: 150, 230, 300.
BAÑO
Description: Axial fans for toilets and bathrooms.
A versalite range combining basic units with its accessories. Water-proof.
Applications: For open air ventilation of small enclosures or though reduced length conduits.
Flow: 95 - 320 m3/h
Models: 90 | 100 | 120 | 150
Versions: timers, automatic Humidistat, sensor presence.
IN-NOVO
Description: In line mixed fl ow Duct fans
High performances, low profile and a compact design, silent. Jagged mixed fl ow blades design with guide vanes, according to the S.N.S. (Serrated Novovent Concept).
Applications: The low profi le and the compact design make it ideal for installation in cramped areas where the space is limited.
Flow: 170 m3/h - 4900 m3/h.
Size 100 - 315 mm. diámetro
Power 25W - 1400kW.
SIROCO
Description: Hand dryers. Hygienic and comfortable
Economical and practical solutions. Different levels of hardness and start-up systems.
Applications: The best solution for hand dryers in public places: low cost, hygiene guarantee and without maintenance.
Models: Plastic and aluminum.
Versions: Sensor.
Power 1500 a 2500 W
<
>
(Click here for full catalogue)
ABOUT US
Imetco is the sole agent of NOVOVENT in Egypt and Libya which one of the market leaders in ventilation systems
CONTACT
Telephone: +203/5829572
Fax: +203/5855868
Cell phone1: +201112020830
Cell phone2: +201111300800
E-mail: sales@imetconovovent.com